Salt Lake County · Utah
Epoxy & resin supply
for Salt Lake City, UT
Laid out on a broad grid between the Wasatch Range and the Great Salt Lake, Salt Lake City mixes older brick bungalows, downtown towers and a growing industrial area on the west side.
Floors in Salt Lake City
Winter inversions and road salt
Contractors coat distribution and light manufacturing floors, restaurants, offices and garages that see snow, salt and high-elevation sun.
Cold winters bring snow and road salt into garages and loading docks, and valley inversions can hold cold, damp air near the ground. Use a salt-resistant topcoat and check slab temperature and dew point before coating.
When to install: Summers are hot and dry with strong sun, which shortens pot life; winters are cold. Work early in summer and heat spaces fully in winter.
Getting supplies: Salt Lake City orders ship from U.S. Resin Supply nationwide, with shipping added to the order. The closest of our 10 stores is U.S. Resin Supply – Las Vegas in Las Vegas, NV, about 430 driving miles away.
Recommended for Salt Lake City
Systems to start with
Solid color floor
Try it for distribution and manufacturing floors in Salt Lake City. Uniform pigmented EpoxyStarz with a specified protective finish.
View system →
Polyaspartic floor
Try it for restaurant kitchens in Salt Lake City. PolyStar PRO ST or PolyStarz Slow over a compatible base.
View system →
Urethane cement
Spec it for older home garages in Salt Lake City. U.C. ProCrete built to a project specification.
View system →A starting point, not a specification. Confirm the full build and each product’s data sheet with our team before ordering.
Salt Lake City FAQ
Questions from Salt Lake City
Do you ship epoxy and coating supplies to Salt Lake City, UT?
Yes. U.S. Resin Supply ships nationwide, including to Salt Lake City. Order online and shipping is added to your order. For product questions, call U.S. Resin Supply – Las Vegas at (657) 477-0778.
Does high-altitude sun affect garage floor coatings?
Strong UV can yellow many epoxies over time, especially near open doors. A UV-stable polyaspartic topcoat helps, so check the data sheet for UV stability.
Where is the closest U.S. Resin Supply store to Salt Lake City?
U.S. Resin Supply – Las Vegas in Las Vegas, NV is the closest of our 10 stores, about 430 driving miles away. Most Salt Lake City customers order online and have materials shipped.
Is there hands-on epoxy training for Salt Lake City contractors?
Yes. Classes run at our stores in California, Nevada, Illinois and Florida, and contractors travel in for them. See the class list on this page or the training page for dates and seats.
Hands-on training
Learn it hands-on
Salt Lake City contractors travel in for these hands-on classes at our stores:
Ordering from Salt Lake City
1 · Order onlinePick your system and products from the catalog. Shipping to Salt Lake City is added to your order.
2 · Ask before you buyNot sure what you need? Call U.S. Resin Supply – Las Vegas at (657) 477-0778 (8:00 AM–5:00 PM) or email steve@USResinSupply.com.
3 · Read the data sheetsCheck each product’s technical data sheet for mixing, cure and recoat times before the job.
Closest store
U.S. Resin Supply – Las Vegas
3052 W Post Rd, Las Vegas, NV 89118
(657) 477-0778 · steve@USResinSupply.com · 8:00 AM–5:00 PM
Drive distances and times are estimates from OpenStreetMap routing without traffic. Shipping is available nationwide.